|
Product Details:
Payment & Shipping Terms:
|
| Temperature: | ≤480 | Working Pressure: | 0.6~5.0 Mpa |
|---|---|---|---|
| Place Of Origin: | Tianjin Port | Grade: | BS5501:ⅡA、ⅡB、ⅡC |
| Seal Material: | Oil Resistant Asbestos Rubber, PTFE | OEM/ODM: | Allowed |
| Material: | Stainless Steel 304/316 | Warranty Of Core: | 6 Months |
| Function: | Hydraulic Filter Filtrate Dust | Core Components: | Engine, Bearing, Pressure Vessel, Pump |
| High Light: | BS5501 Vertical Lift Check Valve,BS5501 vertical check valve,304 Vertical Lift Check Valve |
||
Products decription :
Y-Type Stainless Steel Internal Thread Filter Specialised Pipe And Fittings
Overview of flame arrester products for deflagration pipeline:
Gzw-1 (zhq-b) flame arrester is a new type of flame arrester for combustible gas pipeline. Deflagration arrestor is a safety device used to prevent the flame of gas and liquid vapor from spreading outward. When designing fire resistant internals, it is designed according to the medium of different gas mixture, gas composition, pressure drop, length diameter ratio, number of elbows, and regular packing to achieve a certain fire resistance speed. When the flame enters the flame arrester, it is cut into many small flame streams by regular flame arresters. Due to the effect of heat transfer and wall effect, the entering gas is cooled, so that the cooled gas can not reach the ignition temperature. Without the ignition temperature, it can not form combustion, and finally the flame stream is quenched, so as to achieve the purpose of fire resistance.
1, Performance and characteristics of flame arrester in pipeline
The pipeline flame arrester has the advantages of reasonable structure, light weight, corrosion resistance and qualified explosion resistance. It has been tested with subsonic flame for 13 consecutive times and can resist fire every time. The pipeline flame arrester is easy to repair and install. The fire resistance is qualified, and there is no tempering phenomenon after 1 hour of fire resistance test. The flame arrester core is made of stainless steel, which is corrosion resistant and easy to clean. The shell water pressure test is qualified.
2, Scope of application of flameproof pipeline flame arrester:
The flame arrester is suitable for pipeline, class A with flash point lower than 28 ℃, oil products, hydrogen and oxygen liquefaction, kerosene, diesel oil and methylbenzene crude oil with flash point lower than 60 ℃, pipeline conveying combustible gas, torch, oil and gas recovery system, heating furnace fuel gas pipeline network, gas purification system, gas analysis system and coal mine gas emission system
3. Performance and characteristics of flame arrester in pipeline
The pipeline flame arrester has the advantages of reasonable structure, light weight, corrosion resistance and qualified explosion resistance. It has been tested with subsonic flame for 13 consecutive times and can resist fire every time. The pipeline flame arrester is easy to repair and install. The fire resistance is qualified, and there is no tempering phenomenon after 1 hour of fire resistance test. The flame arrester core is made of stainless steel, which is corrosion resistant and easy to clean. The shell water pressure test is qualified.
4. Scope of application of flame arrester in deflagration resistance pipeline:
The flame arrester is suitable for pipeline, class A with flash point lower than 28 ℃, oil products, hydrogen and oxygen liquefaction, kerosene, diesel oil and methylbenzene crude oil with flash point lower than 60 ℃, pipeline conveying combustible gas, torch, oil and gas recovery system, heating furnace fuel gas pipeline network, gas purification system, gas analysis system and coal mine gas emission system.
Company Profile:
Our Focus on the total needs of our client and our emphasis is on the services and prompt solutions for all their critical purchasing requirements
.
We have an efficient and experienced team of staffs in China and regions concentrating on the trading of engineering steels and its related part and equipments .We have the capacity to execute large and important orders,yet we are conscientious enough to pay attention to the smallest requestments
Our experienced engineers and in house QC engineers also provide technical support on top of their general sales service,
We focus on the total needs of our clients from a particular industry,This reduces the need for most buyer to cope with multiple dealers for products of different size ,Variety ,Several different sources or products from various part of the world ,We also reduce the need for most buyers to deal with different salespeople and departments within the same trading company
Our Strength lies in Our People ,Our resources ,Our flexibility and our tireless commitment to serving our customers
Contact Person: Mr. Terry ding
Tel: 18330713028
Fax: 86-317-6013869
