C30 Grooved Mechanical Ductile Iron Clamp Saddle Tee A694 F42

1. Product information:

Large Diameter Ductile Iron Pipe Leak Repair Clamp Saddle Hough Section Tee Cast Iron Pipe Fittings

The Hough section is a pipe plugging device. The Hough section and the socket Hough section are pipeline repair devices. The socket Hough section is a device for repairing water leakage at the socket of the two pipes. The Huff section is for repairing parts other than the socket. The device has a simple structure and is composed of only two bodies and two rubber pads. It is easy to install. The pipeline can be repaired by only aligning the two bodies at the leaking place and tightening the nut. The device can save the time of water shutdown. , Which can reduce the cost of emergency repair

 Characteristics
1. The combination of plastic contact sealing and elastic contact sealing technology is suitable for pipelines of various materials and effectively controls the leakage of the medium.

2. The site use effect is good, it can be drip-proof, the block structure is adopted, the site construction speed is fast, there is no need to stop the water, the construction excavation is small, and only a small work pit is needed to operate, saving a lot of manpower and material resources. Time, quickly achieve the purpose of plugging.

3. Working pressure: 0.25-1.0MPa, suitable for all kinds of cast iron pipes, cement pipes, and PVC pipes for water leakage maintenance. Complete product specifications, applicable to various national standard pipe diameters, non-standard can be additional

Main type
There are many types of Huff section fittings, mainly including the following main types:

1. For bending pipe fittings, we have more contact with it, that is, turning straight pipes into bends with different radii of curvature, such as elbows, bends, etc.;

2. Pipe fittings with flanges and rounded edges, the former refers to the pipe end convex to the inside or outside, the latter refers to the pipe that forms a bulge or groove in the circumferential direction of the pipe;

3. For pipe fittings with crimping and bottom sealing, increase the total strength of the pipe end to crimp the outer or inner side of the pipe or seal the end of the pipe fitting;

4. Expanded diameter pipe fittings, expand the end of the pipe fitting or a certain part to form various shapes of pipe fittings according to the requirements;

5. Variable diameter pipe fittings refer to the diameter reduction of the pipe end or a certain part of the pipe;

6. Pipe fittings with variable wall thickness refer to changing the wall thickness along the length of the pipe; there are also many processing methods for pipe fittings. Many of them belong to the category of mechanical processing, and the most used are stamping method, forging method, rolling method, rolling method, bulging method, stretching method, bending method, and combined processing method. Pipe fitting processing is an organic combination of machining and metal pressure processing;

7. Change the section of the pipe fittings, according to the requirements, change the circular section into a square, oval, polygon, etc.

Technical characteristics
1. It does not need power supply and is not restricted by remote valves. It works under pressure, especially suitable for underground operations in coal mines.

2. Under normal operating conditions of the pipeline, since the connecting part has a sealing ring, it will not cause water leakage, oil leakage and other environmental pollution.

3. It is suitable for underground engineering, chemical industry, tap water, various pipelines in underground, etc. In the absence of power supply, complete the pressurized connection and water intake of temporary or permanent pipelines.

4. Under normal operating conditions in a pipeline with a diameter of 2 to 6 inches, you can quickly complete positioning and connection on any part of the pipeline without stopping water and oil. It has the characteristics of high strength, small size and easy operation.

5. The quick connector adopts manual operation and does not need to stop production. It is used in water and oil pipelines without any power. It is a new type of rescue water supply equipment.

6. It is mainly used for rescue and rescue in underground coal mines. It can quickly drill holes for water in the pipeline to ensure the need for direct water fire fighting.

7. After use, close the gate valve to restore the original state.

Company  Profile:

Our Focus on the total needs of our client and our emphasis is on the services and prompt solutions for all their critical purchasing requirements
.
We have an efficient and experienced team of staffs in China andregions concentrating on the trading of engineering steels and its related part and equipments .We have the capacity to execute large and important orders,yet we are conscientious enough to pay attention to the smallest requetments

Our experienced engineers and in house QC engineers also provide technical support on top of their general sales service,

We focus on the total needs of our clients from a particular industry,This reduces the need for most buyer to cope with multiple dealers for products of different size ,Variety ,Several different sources or products from various part of the world ,We also reduce the need for most buyers to deal with different salespeople and departments within the same trading company

Our Strength lies in Our People ,Our resources ,Our flexibility and our tireless commitment to serving our customers

Contact Details:

E-mail:admin@paris-fitting.com/dingxueliang0818@aliyun.com

website:www.paris-fitting.com

Skype:naruto5448

whatsapp &We chat:0086-18330713028

Mobile:0086-18330713028

Fackbook website::442237309934712