Payment & Shipping Terms:
|Gasket:||EPDM Or NBR||Color:||Required|
|Place Of Origin:||Tianjin Port||Application:||Air,compressed Air,water,sea Water,oil,acid,alkali,and So On|
|Packing:||Plywooden Case With Plastic Bag||OEM/ODM:||Allowed|
|Supply Ability:||3000 Set/Sets Per Month Flange Type Single Ball Rubber Expansion Joint||Products Name:||Rectangular Expansion Joint|
|Explosion Pressure:||2 Times Of Working Pressure||Vacuum:||53.3(400)/86.7(650)/100(750)mm/Hg|
EPDM Specialised Pipe And Fittings,
EPDM Pipe Leak Repair Clamp,
6Inches Pipe Leak Repair Clamp
Products decription :
CAST IRON Hough Section Pe HDPE Pipeline Plugging Device Specialised Pipe And Fittings
There are many types of Huff section fittings, mainly including the following main types:
1. For bending pipe fittings, we have more contact with it, that is, turning straight pipes into bends with different radii of curvature, such as elbows, bends, etc.;
2. Pipe fittings with flanges and rounded edges, the former refers to the pipe end convex to the inside or outside, the latter refers to the pipe that forms a bulge or groove in the circumferential direction of the pipe;
3. For pipe fittings with crimping and bottom sealing, increase the total strength of the pipe end to crimp the outer or inner side of the pipe or seal the end of the pipe;
4. Expanded diameter pipe fittings, expand the end of the pipe fitting or a certain part to form various shapes of pipe fittings according to the requirements;
5. Variable diameter pipe fittings refer to the diameter reduction of the pipe end or a certain part of the pipe;
6. Pipe fittings with variable wall thickness refer to changing the wall thickness along the length of the pipe; there are also many processing methods for pipe fittings. Many of them belong to the category of mechanical processing, and the most used are stamping method, forging method, rolling method, rolling method, bulging method, stretching method, bending method, and combined processing method. Pipe fitting processing is an organic combination of machining and metal pressure processing;
7. Change the section of the pipe fittings, according to the requirements, change the circular section into square, oval, polygonal, etc.
1. It does not need power supply and is not restricted by remote valves. It works under pressure, especially suitable for underground operations in coal mines.
2. Under normal operating conditions of the pipeline, since the connecting part has a sealing ring, it will not cause water leakage, oil leakage and other environmental pollution.
3. It is suitable for underground engineering, chemical industry, tap water, various pipelines in underground, etc. In the absence of power supply, complete the pressurized connection and water intake of temporary or permanent pipelines.
4. Under normal operating conditions in a pipeline with a diameter of 2 to 6 inches, you can quickly complete positioning and connection on any part of the pipeline without stopping water and oil. It has the characteristics of high strength, small size and easy operation.
5. The quick connector adopts manual operation and does not need to stop production. It is used in water and oil pipelines without any power. It is a new type of rescue water supply equipment.
6. It is mainly used for rescue and rescue in underground coal mines. It can quickly drill holes for water in the pipeline to ensure the need for direct fire fighting with water.
7. After use, close the gate valve to restore the original state.
Contact Person: Mr. Terry ding